Kiʻekiʻe Power LED Traffic Light PCB a me nā hale kūʻai uila
Nā kikoʻī huahana
Mea Kumu: FR-4, FR2.Taconic, Rogers
Mānoanoa keleawe: 1/2 oz min;12 oz max
Mānoanoa Papa: 0.2mm-6.00 mm(8mil-126mil)
Min.Ka nui o ka puka: 0.1mm(4mil)
Min.Laina Laina: 0.075mm(3mil)
Min.Kaʻawale laina: 0.1mm4mil)
Hoʻopau i ka ʻili: Immersion Gold/Au, HASL, OSP, etc.
Warp & Twist: 0.7%
Kūlana Hole: +/- 0.075mm(3mil) CNC Drilling
Kū'ē Kū'ē: 10Kohm-20Mohm
Ka lawe ʻana: <50ohm
Voltage ho'āʻo: 10-300V
Ka Mana ANCE: +/-10%
ʻOkoʻa Impenitence: +-/10%
ʻO ka hoʻomanawanui ʻana: +/-0.125mm(5mil) Ke Alanui CNC +/-0.15mm(6mil) ma ka Punching
Anawaena Hole (H) PTH L: +/-0.075mm(3mil) NON-PTH L: +/-0.05mm(2mil)
Ka laula o ka mea alakaʻi (W): +/-20% o ka hana kiʻi kumu PTH L: +/-0.
ʻO kā mākou lawelawe
Hiki iā mākou ke hāʻawi i ka lawelawe hoʻokahi:
1. Nā papa kaapuni PCB.
2. E-ho'āʻo.
3.Electronic mea kuai.
4. Hui PCB: loaʻa ma SMT, BGA, DIP.
5. PCBA hana hoao.
6. Hui pa.
Ka nui o ka huahana PCB
| Ka mana hana PCB | |
| 'ikamu | Hōʻike |
| Mea waiwai | FR-4, FR1,FR2;CEM-1, CEM-3, Rogers, Teflon, Arlon, Aluminum Base, Copper Base, Ceramic, Crockery, etc. |
| Olelo Hoolaha | Loaʻa ka Tg CCL kiʻekiʻe (Tg>=170 ℃) |
| Hoʻopau Mānoanoa Papa | 0.2 mm-6.00mm(8mil-126mil) |
| Hoʻopau ʻili | ʻO ka manamana gula (>=0.13um), ke gula kaiapuni (0.025-0075um), ke gula pale (0.025-3.0um), HASL (5-20um), OSP (0.2-0.5um) |
| Kinohi | Alanui, Punch, V-cut, Chamfer |
| Lapaʻau ʻili | Solder Mask (ʻeleʻele, ʻōmaʻomaʻo, keʻokeʻo, ʻulaʻula, uliuli, mānoanoa> = 12um, Block, BGA) |
| Silkscreen (ʻeleʻele, melemele, keʻokeʻo) | |
| Peel hiki ke-mask (ulaula, uliuli, mānoanoa> = 300um) | |
| Core liʻiliʻi | 0.075mm(3mil) |
| Mānoanoa keleawe | 1/2 oz min;12oz ka nui |
| Min Laina Laulā a me Line Spaging | 0.075mm/0.075mm(3mil/3mil) |
| Min Hole Anawaena no ka CNC Drilling | 0.1mm(4mil) |
| Min Hole Anawaena no ke Kuʻi | 0.6mm(35mil) |
| ʻO ka nui o ka panel | 610mm * 508mm |
| Kūlana Puka | +/-0.075mm(3mil) ʻO ka ʻeli ʻana o CNC |
| Laulā o ke alakai (W) | +/-0.05mm(2mil) a i ʻole +/-20% o ke kumu |
| Anawaena puka (H) | PTHL:+/-0.075mm(3mil) |
| ʻAʻole PTHL:+/-0.05mm(2mil) | |
| Hoʻomanawanui Outline | +/- 0.1mm(4mil) ʻAla CNC |
| Warp & Twist | 0.70% |
| Kū'ē Kū'ē | 10Kohm-20Mohm |
| Conductivity | <50ohm |
| Voltage ho'āʻo | 10-300V |
| Nui o ka Panel | 110 x 100mm(min) |
| 660 x 600mm(max) | |
| Layer-layer kuhi hewa | 4 papa:0.15mm(6mil) ka nui |
| 6 papa:0.25mm(10mil) ka nui | |
| Min mokowā ma waena o ka ʻaoʻao puka a i ke ʻano kaapuni o kahi papa i loko | 0.25mm(10mil) |
| ʻO ka mamao iki ma waena o ka papa kuhikuhi i ke ʻano kaapuni o kahi papa i loko | 0.25mm(10mil) |
| Ka mānoanoa o ka papa | 4 papa: +/-0.13mm(5mil) |
